AMGUPS-I48-P240

5060811144374
48 VDC, 240W (5A) Industrial Uninterruptable Power Supply (UPS), DIN-Rail Mounting, -40°C to +70°C, 
3x Fault Relay Outputs (Supports Battery Voltages 44-57.6 VDC)
Features
  • -25 to +70°C temperature maintains performance in extreme conditions
  • DIN-Rail mountable - quick to install and remove for maintenance
  • High efficiency - >83% typical
  • Universal 90-135VAC or 180-305VAC input ranges
  • Supports open lead acid, sealed lead acid, lead gel and Li-Ion battery types
  • 3 Charging levels - Boost, Float & Recovery
  • Automatic diagnostic of battery status
  • High I/O isolation test voltage up to 3000VAC
  • Contact closure outputs for mains failure & discharged or damaged battery
  • AMG 3 Year Support Warranty

Product Status
Active

Designed in a robust DIN rail housing, the AMGUPS-I48-P240 series industrial all in one uninterruptable power supplies are ideally suited for powering AMG PoE Ethernet equipment. Its wide operating temperature range ensures reliable operation in harsh environments.

The UPS automatically manages the distribution of power between the load and battery, supplying power to the load as the first priority.

Connected batteries are monitored and charged using intelligent algorithms to ensure correct charging and conditioning ensuring the maximum possible lifespan is achieved. Real-time LED diagnostic blink codes aid in the installation and trouble shooting of any issues.

A wide variety of battery types are supported with user configurable jumpers setting predefined intelligent charging curves for Open Lead Acid, Sealed Lead Acid, Gel and Li-Ion battery types.

The AMGUPS is manufactured in the EU.

MTBF (Hours)
300000
Power Consumption (W)
0
Power Inputs
1
Power Interface
5 Pin Terminal Block
Input 1 Voltage
90-135 VAC / 180-305 VAC (Manual Select)
Heat Dissipation at Max Load (BTU/h)
819
Operating Temperature
-25°C to +70°C
Storage Temperature
-40°C to +85°C
IP Rating
IP20
Product Class
Industrial Grade
Warranty
AMG 3 Year Warranty
Compliance
NDAA Compliant
TAA Compliant
Mounting Type
DIN Rail
Input Current
5A (115 VAC) / 2.5A (230 VAC)
Output Power
240W
Output Voltage
48 VDC
Output Current
5A @ 48 VDC
Output Voltage Note
Output Voltage Follows Battery Voltage
Output Battery Voltage
Follows Load Output
Charging Current
5A
Reverse Battery Protection
Yes
Sulfated Battery Check
Yes
Short Circuit Element Detection
Yes
Charging Curve
Automatic 4 Stage
Battery Types Supported
Open Lead Acid
Sealed Lead Acid
Gel
Li-Ion (LiFePO4)
Ni-Cd
Output Load Voltage
44 - 57.6VDC
Start From Battery Without Mains Input
Yes (2-Pin Remote Input)
Mains Input Power Relay
Yes (Type C)
Low Battery Relay
Yes (Type C)
Battery / System Fault Relay
Yes (Type C)
Dimension Drawing (mm)

Dimensions
Width = 100 (mm) / 3.94 (in)
Depth = 135 (mm) / 5.31 (in)
Height = 115 (mm) / 4.53 (in)